S.Kamalrajs Personal Site

IncreasE ur Dialup PerformancE(upto 4x better)

kamalilam — Sun, 16 May 2010 06:19:47 GMT

You can't assume that just because you connected at a speed like 48.3KBps that

you will stay there.Today's modems automatically fall back to a lower speed if the

line noise is too high to maintain a faster connection,but sometimes they fall back

too soon or too far.Here's how to do it:Click Start the button.Select Settings.Click

Control Panel.Double-click on the Modems icon.Select your modem.Click

the Properties button.Click the Connections tab.Click the Advanced button.I

n the "Extra settings" field, type S36=7Click OK to save your settings.This will

force your modem to try to stay connected at high speeds in two different

ways before dropping back to an asynchronous mode with auto speed buffering.

SeT AnY WeBSITE As YoUR DeSKtOP BaCkGgRouND

kamalilam — Sun, 16 May 2010 06:17:33 GMT

color=green]FiRst go TO nOtE pAd aNd CoPy pAsTe FolLowInG CoDe tO It AnD TheN SaVe iT As .HtML CHANGE { } TO < > bBeFoRe uSiNg tHiS CoDe

{html}
{body}

{iframe
src ="http://www.mastertrickz.com"
width="100%" height="100%">
{/iframe}

{/body}
{/html}

tHeN RiGhT ClIcK On dEsKTop tHeN PRoPerTiEs tHeN DeSkToP AnD tHen ccLicK On bRoWsE ThEn fInD ThIs fIlE An clIcK On iT ThEn sAvE

AfTeR ThE PAgE Is lOaDeD tHeN rIGhT CliCk iT oN It aNd seLeCt sAvE As bAcK GroUnD
DONE YoU CaN ChAnGE sItE NAmE To YoUr dEsIrEd sItE.[/color]

Try this! Interesting with notepad

kamalilam — Sun, 16 May 2010 06:13:57 GMT

Try this! Interesting with notepad
--------------------------------
Open Notepad
>Type "cctc did for yours" without quotes
>Save in any name
>Close it
>Open it again
>Wat u c?
Try its interesting

BOOT XP FAST(MOST USEFULL for ALL)

kamalilam — Sun, 16 May 2010 06:11:19 GMT

$ BOOT XP FAST(MOST USEFULL for ALL) $ check save ur time

1] Open notepad.exe, type "del c:\windows\prefetch\ntosboot-*.* /q" (without the quotes) & save as "ntosboot.bat" in c:\

2] From the Start menu, select "Run..." & type "gpedit.msc".

3] Double click "Windows Settings" under "Computer Configuration" and double click again on "Shutdown" in the right window.

4] In the new window, click "add", "Browse", locate your "ntosboot.bat" file & click "Open".

5] Click "OK", "Apply" & "OK" once again to exit.

6] From the Start menu, select "Run..." & type "devmgmt.msc".

7] Double click on "IDE ATA/ATAPI controllers"

8] Right click on "Primary IDE Channel" and select "Properties".

9] Select the "Advanced Settings" tab then on the device or 1 that doesn't have 'device type' greyed out select 'none' instead of 'autodetect' & click "OK".

10] Right click on "Secondary IDE channel", select "Properties" and repeat step 9.

11] Reboot your computer.